Average Rating starstarstarstarstar

Click here to add your own comments

Jun 06, 2015
Re: Clear Green Water
by: Margaret

Thank you for you're advice. I did everything you recommended,but used what products were available to me. HTC Metal Control helped,but pool is still clear green. Added the acid and liquid chlorine. Changed the filter twice a day,the filter and the water in the fliter were a copper color and super dirty. Numbers are:

Thanks for the follow up. The pH is fine at 7.8. for salt pool a pH level of 7.6 - 7.8 is good. The reading that is a concern is the CYA. The first reading was 30 - 50ppm, or maybe 100ppm. The newest reading is now 0 CYA. You need to be sure what the CYA level is. Some salt pool owners choose to not use CYA due to the chlorine cell's ability to constantly produce chlorine. I'm of the opposite opinion that all outdoor pools should have at least 30ppm of CYA, maybe not tabs, but some CYA. I'd encourage you to do another test to determine the actual CYA level. Your pool store is able to test for it.

As for the emerald green water I'll give the same advice to look for Jack's Purple Stuff. It's HEDP and is the best for your issue. You need to dose your pool per the directions on the bottle until the metal issue is finished.

Jun 02, 2015
Clear Green Water
by: Margaret

I havr an Intex 20ft X 4ft Ultra Frame Above Ground pool With a Intex Crystal Clear Salt Water System. Filled it with 6400 gallons of city water and the rest with our well water. After using 1 time it turned clear green. I used HTh Ultra Complete Shock, 1 bag, and the pool is still clear green. Here are my numbers using HTH 6way test strips
TH 200
FC/Bromine 10/20
PH color between 7.8 and 8.4
TA 240
CYA color between 30-50 and 100
Salt at 3470
We do not have the option of draining it and starting over -drought-
What's the next step?
Thank you

Thanks for the question Margaret

The first thing is to get a good test kit, the Taylor K-2006. Test strips are good but are prone to inaccuracies. The CYA is what I would be concerned about. There's a HUGE difference between CYA of 30ppm and CYA of 100ppm. The first is fine. The 2nd requires a partial drain and refill. Without knowing the exact number I can't tell you which one to do. Unfortunately there's no chemical on the market that will effectively reduce the CYA.

The reason your pool turned an emerald green is because of the metals in the water. You need to get a good metal sequestrant. I recommend Jack's line. You can see if Walmart has it. Amazon is a good choice as well. A metal sequestrant does not remove metal from pool water. It holds it in solution until it can get filtered. Then you backwash the metal out. Because metal sequestrants break down over time and get filtered and backwashed out, you will need to add a bottle once per week or when your pool needs it. Follow the directions on the bottle.

Let's say the CYA is fine, between 30 - 50ppm. First is to get the pH and TA down with muriatic acid. The pH should be between 7.0 - 7.2. Chlorine works better at a lower pH level. 12 oz. per 10k will reduce the pH 0.2 and TA 10ppm. Yours is a smaller pool so it won't require much acid at all. Start with 20 oz. around the perimeter and sweep well to mix it up.

Be sure your filter is working properly. Is it a cartridge filter? If so it must have less than 2000 filter hours on it to be effective. You cannot clean dirty water with a bad filter. If you're unsure as to the hours it's best to get a new one.

Next is to NOT use HTh Ultra Complete Shock. It's calcium hypochlorite which has a pH of 12. You're reducing the pH with acid but then raising it back up with HTH. Only use liquid chlorine to shock. Use 1 gallon around the perimeter and sweep well. We need to define our terms, and this is very important to understand. Shocking is a process, not an event. It's not something to buy, it's something you do. The trick is to get AND keep the chlorine above 10 - 12ppm for a period of time. You'll need to manually dose the pool with chlorine to keep it at 10 - 12ppm. Make the adjustment at night, then retest in the morning. Be sure to have the pump running 24/7 and backwash once per day. You can go up to 15ppm, but no higher. Anything after that and you're wasting money and chemicals.

You'll know this is working because the pool will go from green to a white/grey cloudy and the chlorine will begin to hold better. First you may lose most, then 2/3, then 1/2, and so on. Once you only lose 1 - 2ppm of chlorine 8 - 10 hours after the last application you know the algae is dead. Now it's just a matter of filtering and backwashing once per day. Broadcast the chlorine around the perimeter of the pool and brush well. This will loosen up any algae adhering to the walls and bottom.

Shocking a pool isn't adding a bag of chlorine to a pool and expecting it to clear up the pool. Shocking a pool means to kill/eliminate the algae and organic matter. This is done by dosing the pool with enough chlorine to reach a high enough FC level and keeping it at this level to allow the chlorine to kill the algae and organics in the pool.

Once again, what I've just described is for a CYA of 30ppm, NOT 100ppm. CYA of 30ppm is fine while 100ppm requires a 2/3 drain and refill.

The salt level seems to be fine but be sure the cell is OFF during this process.

If you feel your situation is more complex than this, I do phone consultations. It makes things go much faster and many people have found it extremely beneficial, saving them time and money in the long run. All your questions will be answered. I have nothing to sell you so you know I'm not bias.

Pool Consultation

Swimming Pool Care eBook

How To Clear Up A Green Pool eBook

Hope this helps and have a great Summer.


Apr 30, 2015
Salt Water Pool Clean Up
by: Anonymous


Thanks for the question

First is to remove as much debris as you can using a leaf rake. Then be sure your filter is running and in good order. Without knowing the kind of filter you have I can only make general statement i.e. if the cartridge is torn or has more than 2000 filter hours it needs to be replaced.

Next is to get all of the chemical readings. You need the actual numbers which you can get using the Taylor K-2006 kit or go to the local pool store. Be sure the water is topped off, between 1/3 - 1/2 up from the bottom of the skimmer. Remove any plugs in the skimmer and returns.

Again without knowing your chemical numbers it's hard to say what to do first. The pH and TA may be high or low, etc...

Be sure the pH is down to 7.0 and shock the pool with liquid chlorine. It's 1 gallon to increase the FC 10ppm per 10k gallons. Check the CYA and adjust if needed. The range is 30 - 50ppm.

You probably need to shock a few times to kill the algae. Keep filtering 24/7 and clean the filter once per day. At the very end of the process you can use a clarifier to help with the filtration process.

If you feel your situation is more complex than this, I do phone consultations for $37 donation. It makes things go much faster and many people have found it extremely beneficial, saving them time and money in the long run. All your questions will be answered. I have nothing to sell you so you know I'm not bias.

Pool Consultation

Hope this helps and have a great Summer.


Feb 22, 2015
BioGuard Mineral Springs Beginnings & Balance Pak
by: Kayla

Robert you are a life saver. I will definitely follow your advice!!! You are the best thank you thank you thank you!!!!!


Sep 04, 2012
Green Salt Water
by: Anonymous

Algae killer, baking soda, vacuum. Algae killer will kill algae, baking soda will make it sink to bottom. Then vac.

Bleach will help clear the water takes about three days, use powder.

Thanks for the comment, however, you need to be more specific. What kind of algae killer are you referring to and how much would be needed? How much baking soda would one need per 10,000 gallons? Baking soda raises both the pH and TA so how would you take care of any increase? How much acid would you use per 10,000 gallons? Are there any sid effects?

And then there's the bleach. Although bleach can chlorinate pools, the comment fails to say how much would be needed.

What does "use powder" mean? Powder algae killer?

You may know, but when giving information or commenting it's best to be specific and give detailed instructions because others may not know or understand.



Click here to add your own comments


Return to Salt Water Swimming Pools.

eBooks Are Perfect Desktop & Mobile Device!!

swimming pool care, basic pool care, above ground pool maintenance, inground, salt water

Click Here To Learn How This eBook Can Save You TONS Of Time & Money


Click Here To Learn The Best Way To Clear Up Your Pool 


All Resources In One Convenient Package. Click HERE To Get Started.

Recent Articles

  1. How To Clear Up A Cloudy Pool eBook

    How To Clear Up A Cloudy Pool eBook

    Read More

  2. Pool Float & Sweep

    How do I keep the hose from my pool sweep and the floater from colliding? If I tie the float off where is the best place, and one last if the float is tied off.

    Read More

  3. The calcium hydochlorite will not dissolve in our pool

    The calcium hydochlorite will not dissolve in our pool. It is suspended in the water

    Read More